If this were a live FonBar, you would log in to the hotspot through the form above.
 

ClearWire’s WiMax/WiFi Router

January 13, 2009

Reviews are coming in from Portland OR, USA about the quality of WiMax service launched there by Clearwire. Most of what I am reading sounds positive.

I mentioned Clearwire in my previous blog. They have been offering a sort of “pre-WiMax” wireless broadband service in major cities across the USA.

Clearwire and Sprint had intended to partner under the Xohm name, and roll out WiMax throughout the USA. Austin, TX had been one of those target cities, and I was very excited! To make a long blog short, Sprint is not doing so well, and the partnership dissolved, leaving Clearwire to attempt a more limited roll-out on their own.

Here is their handy little WiMax/WiFi router. This device marries a WiMax modem in an USB dongle with a small WiFi router equipped with an USB port. Doesn’t that sound familiar?

It’s dissapointing that Fon’s Fonosferat Program has avoided thinking of La Fonera 2.0’s USB port as a WAN interface. With WiMax and WiBro dongles available for a year already, Fon could have achieved the WiMax-Fon router by now. Perhaps they are still looking for a way to deliver Fon CEO Martin Varsavsky’s vision of *providing* WiMax service via a Fon device which is tethered as usual to DSL or cablemodem?


Fon Flirts With Fonera FonPod Outdoor Router

December 15, 2008

Note: I meant to post this over the weekend, but I had to wait for issues with my bloghost to clear up.

After three years of intense demand, Fon CEO Martin Varsavsky is featuring a no-promises, not-in-production weatherized Fonera in his blog. This is perhaps out of envy for Meraki’s recent publicity for their tiny meshing APs and rugged solar-powered routers.

Here is Fon’s current concept of an outdoor wifi appliance:

[Click Us]

This device does not currently have an official name, but I like to call it “Fonera FonPod”. Isn’t that catchy? 🙂

I’m not wild about the design of this enclosure as presented. It’s a flattened box, about 50% larger than La Fonera 2. It seems large enough to house a flat-panel antenna, but that does not appear to be what Fon has in mind. The box splits vertically into front and back halves, and is held together with 10 visible screws. The front would appear to be white plastic with a honeycomb pattern which we have never seen associated with Fon until now. It’s probably another company’s production model with a “Fon” sticker pasted to the front. 😉

The top of the case has an antenna jack, and the bottom appears to have a compression port for admitting cables through an airtight seal. This would make FonPod the first Fonera which has the antenna opposite the cables. All previous models have had jacks and antennas together along the rear, making installation anywhere but a table or shelf awkward. Suprisingly, the rear of the enclosure appears to have three additional connections for WAN, LAN(!) and Power. These connections don’t appear to be weather-resistant, and if these are on the rear, the bottom connection becomes a mystery.

The appearance of LAN suggests that the Fonera inside is based on the Plus or 2.0 models. While a LAN jack would seem pointless for a device that will be installed in remote places, it might be useful for passing an Ethernet connection through to additional equipment, like another AP or a networked security camera. Availability of a USB jack would be useful for similar reasons, and probably enable the use of much cheaper hardware. I’ve been advocating the marketing of Fon routers to metro wifi and building managements for this reason. A simple instrument package could be plugged into such extra ports to provide traffic cams, triangulate gunshots and report weather and smog conditions. That added value could make Fon more attractive than Meraki for some large and wealthy markets.

Bear in mind that the device Fon proposes is still a router, not an access point. This is sort of overkill for the kind of work it will be doing. Let us pray that the LAN port is finally bridged, instead of senselessly NAT’ted. Fon would benefeit by outgrowing their tendancy to repurpose existing products by merely rewrapping them.

[Click Me]

The back of the case has some exposed mounting studs, apparently used to attach the hardware within, and the backplate dips up and down along the seam where other screws ring the perimeter. It would seem that the halves are clamped around a very large, vertically aligned gasket, and the plastic half is rather soft. Those screws are going to rust very quickly, and that sort of gasket is just not practical for long, leakproof life. There appears to be some mounting hardware inside the shipping box, but it is hard to tell whether FonPod must be attached to a pipe, a flat surface, or either. Since there is a (?)7dbi omnidirectional dipole antenna included, this mounting hardware probably does not provide pivoting azimuth for pointing a directional antenna.

I’d like to take a crack at designing a better enclosure, so here are some of my thoughts. For some of my inspiration, see the below photos of an actual ClearWire wireless broadband device deployed in markets like nearby Corpus Christi TX. Only twice the size of La Fonera 2, it is based on technology similar to WiMax, which will soon replace it. This particular device isn’t for outdoors, but rather sits vertically on a desk or shelf with one side facing the ClearWire tower. It integrates a large flatpanel antenna with a network device in the same package, and the case is basically a deep sleeve into which the electronics slide from below. If it was possible to seal this and make all connections through the bottom, it would make a decent outdoor enclosure.

[Click Us]


My concept of Fonera FonPod is an enclosure designed to resemble a 2x scale La Fonera Plus. It has an internal flatpanel antenna like Fontenna, and ships with Power over Ethernet (PoE) adapters. The mounting bracket should permit installation upon either vertical wall or pole, and feature adjustable angle of elevation. The case should be manufactured as a seamless PVC shell with the bottom having the only opening, through a recessed partition.

The partition would have a fitting to allow passage of 1-2 cables through a seal. The partition would have a gasket around it’s perimeter, and would have a framework mounted to it’s inner side. All internal components would be mounted to that framework so that they all slide in and out as though in a drawer.

[Click Us]

A standard La Fonera 1/+/2 would simply be inserted inside and attached to internal cables.

An optional kit would consist of a holder for a dozen or so standard rechargeable batteries, and include a simple voltage regulator, so that Fonera FonPod might be powered by sun or wind.

FonPod II, which might be a WiMax FonPod, would look nearly identical, but the flat panel antenna would be aimed at the WiMax base station and there would be a dipole wifi antenna pointing down from the bottom, or there could be a second flat panel antenna connected with a cable.

So, what do you folks think? Add your comments below, and feel welcome to include links to pics or diagrams of your own.


WiF Podcast #2

April 9, 2007

Mike, Dan and Chad

We’re back!

Dan Berte of http://www.wirelessisfun.com/ has edited our 3 hours of recorded ramblings into several bite-sized segments. Dan and I were joined by Mike Puchol of tech.am blog, who is also a founder and CTO of http://www.whisher.com/. We’re demonstrating our rapidly improving style, so look out, http://www.kenradio.com/!

Download segments at: http://wirelessisfun.com/2007/04/09/wif-podcast-2/

SHOW NOTES:

Court rules Vonage must stop using Verizon patents.Vonage claims it has long prepared for this, and customers have no fear of service termination. Mike Snyder, Vonage’s chief executive officer says “Friday’s events represented one small step in what is sure to be a long legal battle.” Vonage, whose shares fell nearly 26% on Friday, also said the litigation would likely take years, but added that it was confident it would continue to provide service to its over 2.2 million subscribers. Will they license from Verizon? Will they patch their code? Is this death for Vonage?
http://gigaom.com/2007/03/23/vonage-has-to-stop-using-verizon-patents/
http://andyabramson.blogs.com/voipwatch/2007/03/the_v_battle.html

EarthLink Unveils Wi-Fi VoIP Phone with wifi router built into base…

This appears to be the same “FON Router with Skype Handset” from July, 2006.
http://wifinetnews.com/archives/007493.html
http://andyabramson.blogs.com/voipwatch/2007/03/earthlink_wifi_.html
http://blog.fon.com/en/archive/gadgets/fon-router-with-skype-handset.html

Fon Blog and Martin Varsavsky release early details of their upcoming “Fontenna”

This will be an external, cable-tethered 7db box.
http://blog.fon.com/en/archive/gadgets/fontenna-update.html
http://english.martinvarsavsky.net/fon/the-secret-is-in-the-fontennas.html

Fon suggests again that their partnership with McAfee makes their product safe.

Deja Vu from Dec 12 last year…
http://blog.fon.com/en/archive//fon-mcafee.html
http://www.mymcafee.com/Partner.aspx
http://english.martinvarsavsky.net/fon/is-fon-safe.html
http://elfonblog.fondoo.net/?p=43

Fon releases firmware upgrades for VOIP phones

They can now log in to Fon hotspots. Is the problem solved? Listener feedback encouraged.
http://wirelessisfun.com/2007/03/23/brief-on-fon/
http://www.fon.com/en/info/whatsNew

Another Fon issue fixed by Apple Computer-

Airport Extreme patch makes it easier to connect to La Fonera now.
http://fonblog.wordpress.com/2007/03/26/mac-osx-patch-for-airport-to-solve-fonera-wpa-issue/
http://wsidecar.apple.com/cgi-bin/nph-reg3rdpty2.pl/product=13259&cat=1&platform=osx&method=sa/AirPortExtremeUpdate2007002.dmg

Melting La Fonera APs…

The infamous YouTube video is probably a hoax, but an expert analysis by Mike Puchol suggests that the electronics may last no more than a year due to heat stress.
http://tech.am/2007/03/17/fonera-overheating-are-we-cooking-yet/
http://wirelessisfun.com/2007/03/19/la-fonera-to-die-in-one-year/

Fon’s upcoming La Fonera 1.5 will have a LAN port

Probably to be based on the slightly better Accton MR3202A 2 Port Mini Router. Since La Foneras have a 2 year warantee, this could mean a free upgrade when the 1.0 fries.
http://tech.am/2007/02/26/new-routers-with-lan-and-usb-ports-but-not-by-fon/
http://www.accton.com/products/product_range/21_weap/MR3202A.htm

Fon will have a Wi-Max/WiFi AP in the future.

La Fonera x will use Wi-Max service instead of Cable/DSL modem.
http://wirelessisfun.com/2007/03/20/fon-wifi-operator-planning-to-deploy-wimax/
http://elfonblog.fondoo.net/?p=19
http://english.martinvarsavsky.net/fon/wimax-and-fon.html

Ericsson halts Wi-Max technology in favor of 3G.

Now only Intel makes the chips.
http://www.wireless-weblog.com/50226711/ericsson_says_goodbye_to_wimax.php

Whisher releases new Mac and Linux clients.

Linux client offers intrim solution to exposed Wi-Fi encryption keys.
http://blog.whisher.com/2007/03/22/linux-version-of-whisher-released/